|
|
Build Your Online Product Catalogs?
| Product Name: |
ZG-P-8130/ZG-I-8260
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
none |
| Price Term: |
fob |
| Port of loading: |
shanghai |
| Minimum Order |
3ton |
| Unit Price: |
1 |
|
ZG-P-8130/ZG-I-8260,Cole Resistance Polyester Pu,Cold Resistance Sole PU Resin in Factory
Cole Resistance Polyester Pu
Cold Resistance Sole PU Resin in Factory
PU Resin for shoe sole of cold-resistant shoes
Characteristic: Medium hardness, medium and low density, cold resistance and semi cold resistance
Application: Applicable to the production of cold-resistant and half hardy soles for both men and women shoes
Typical properties of China Cold Resistance Sole PU Resin
Name of products Appearance Viscosity£¨Pa¡¤s/50℃£© Density£¨g/cm3/40℃£© Package£¨kg£©
ZG-P-8130 White or pale yellow, liquid, no foreign material 1.00-1.40 1.16-1.20 18
ZG-I-8260 Tran***rent liquid, no foreign materials 0.20-0.40 1.18-1.20 20
Reference shipments ratio: A/B=30/24(barrel)
Catalysts and auxiliary agents:
ZG-P-8130/ZG-AC-2/water =18kg/220g/0-30g
Note: corresponding adjustment should be made to the addition of auxiliary agent at different areas, different environment and different production conditions.
Reactivity Technical index Test item Reference physical properties
Reference ratioP+C/I 100/80-82 Molded density of sole£¨g/cm3£© 0.45~0.55
Using temperature£¨℃£© material: 45-50; B material:38-42 Hardness (type A) 45~55
Cream time£¨s£© 7~9 Tensile strength£¨***£© 3.5~4.5
Rise time£¨s£© 30~45 Elongation£¨£¥£© 350~450
Metal mold temperature£¨℃£© 45~55 NBS abrasion resistance £¨£¥£© ¡Ý10%
Demould time£¨min£© 5.0~7.0 Free foam density£¨g/cm3£© 0.20~0.26
Folding endurance (room temperature)(40,000 gap length mm) £¼8
China Semi Cold Resistance Sole PU Resin Molding conditions & physical properties:
Matching ratio is based on the optimal matching value which will vary with the category and additive amount of paint additives added.
Free foam density will vary with the seasons (temperature, humidity).
Stripping time will be extended with the increase of the thickness of moldings.
Folding endurance conditions: bending angle is 90 degrees and the frequency is 80 times / min * 40 thousand times
Data listed above is j |
| Company: |
Zhejiang HengTaiYuan P.U Co., Ltd.
|
| Contact: |
Ms. nina ye |
| Address: |
Science Park No.1 Road,Industrial Zone,Wenling City,Zhejiang Province,China |
| Postcode: |
317500 |
| Tel: |
0576-86992777 |
| Fax: |
0576-86992777 |
| E-mail: |
|
|
|
|
Home
